Laversab ARTS 7000, User Manual, Page: 172 / 194

ARTS 7000 User Manual Aviation Systems
Rev A6 Page 172
5. Power
Sets the output power level of the ARTS 7000.
6. % Replies
Allows the user to control the number of Replies that the ARTS 7000 will respond to
within a range of 0-100% in 1% steps.
7. Alt Detect
When On, the ARTS 7000 will identify the UUT altitude from the Mode S data received
from the aircraft. See UUT ALT below for manual altitude setting.
8. Converge
When On, the ARTS 7000 intruder will purposely fly into a collision. The scenario will
end when the Altitude of the Intruder is 0Ft and 0Nm from the target aircraft.
9. Range Start
Intruder Start Range in Nautical Miles. Usually in a test this range is set initially to a
distance greater than the Traffic Advisory range.
10. Range Stop
Intruder Stop Range in Nautical Miles. The Range that the intruder will stop from the test
aircraft.
11. Range Rate
Range Rate is the air speed of the intruder as it approaches the test aircraft. Set in
Knots.
12. Alt Start
The altitude start point of the Intruder. Set in Feet.
13. Alt Stop
The altitude stop point of the intruder. Set in Feet.
14. Alt Rate
The vertical speed of the intruder set in feet per minute.
15. UUT Altitude
Allows manual setting of the Aircraft Altitude. If Alt Detect is On, this parameter is
unavailable.