Laversab ARTS 7000, User Manual, Page: 131 / 194

ARTS 7000 User Manual Aviation Systems
Rev A6 Page 131
Test Selection pop up screen.
Test Name Description
The BASIC test is a quick verification test of the key parameters of the
transponder. This test includes the frequency, power, and pulse
characteristic checks of the reply only.
This test does not meet the
specific reequipments of Far 43 Appendix F.
The Full test is a full capability test of all parameters of the
transponder reply. This test is carried out in accordance with the
requirements of FAR 43 Appendix F.
The CUSTOM Test allows the operator to select at a modular level which
tests are to be completed. 1 to n tests may be selected and run as
required. This test does
not meet the specific reequipments of Far 43
Appendix F.
Select the required tests by selecting the associated tick icon.
The LOOP Tests allow the operator to select which module or modules are
required to be tested. The test will then continually loop only the selected
test. This test does
not meet the specific reequipments of Far 43 Appendix
F.