LAVAZZA LB2317 Operation And Maintenance Download Page 58

Page: 58 / 88

English

9.3

Loading Capsules

The

desired

products

should

dispensed

exclusively

using

the

compatible

LAVAZZA

BLUE capsules.

Capsules

other

than

compatible LAVAZZA BLUE
capsules,

coffee

beans,

ground and/or freeze-dried
coffee should not be used.

The capsules supplied for
this machine are single-use
capsules and each of them
should be used for one
brewing cycle only.

Capsules should not be
reused to brew two or
more products.

To insert the capsule, the loading tray must be opened by
pushing it inwards as far as it will go.

Do not force the tray
further than its limit.

Pick up a single capsule and insert it into its seat.

The capsule should be
inserted as shown in the
figure.

The

capsule

must

inserted into place without
the use of any tools.

Summary of Contents for LB2317

























































































Search results

Summary of Contents for LB2317

Reviews:

Related manuals for LB2317

Brands by name

Popular brands

LAVAZZA LB2317, Operation And Maintenance

Search results

Summary of Contents for LB2317

Reviews:

Related manuals for LB2317

Brands by name

Popular brands