28
EN
TROUBLESHOOTING
N° Problem encountered
Possible causes
Solution
Result
5
Water leaks at the front side of
the coffee machine.
1 - Spent capsule drawer not
inserted correctly.
Insert the spent capsule drawer
correctly.
Ok:
call solved.
Non-ok:
go to step 2
2 - Spent capsule drawer
filled.
Empty the spent capsule drawer
and the drip tray.
Ok:
call solved.
Non-ok:
go to step 3
3 - Capsule stuck.
Lift and lower the capsule
loading lever. If this is not
enough, disconnect the machine
from power mains and operate
manually to remove the capsule
from the duct.
Ok:
call solved.
Non-ok:
go to step 4
4 - Capsule not compatible.
Use Lavazza capsules or
compatibles.
Ok:
call solved.
Non-ok:
machine being serviced.
6
Water leaks at the rear side of
the coffee machine.
1 - Tank not inserted correctly. Insert the tank correctly.
Ok:
call solved.
Non-ok:
passare al punto 2
2 - Tank damaged.
Check for leaks in the tank
keeping it separate from the
machine.
Ok:
call solved.
Non-ok:
machine being serviced.
7
The loading lever does not
reach the supply position or
requires an excessive closing
effort.
1 - Spent capsule drawer
filled.
Empty the spent capsule drawer.
Ok:
call solved.
Non-ok:
go to step 2
2 - Capsule fitted incorrectly.
Repeat the sequence, lever in
the off position, lever in the
brewing position; if this is not
enough, operate manually
to remove the capsule from
the duct with the machine
disconnected from power mains.
Ok:
call solved.
Non-ok:
machine being serviced.
8
Blinking red warning light
ON .
1 - The temperature
measured inside the
machine is lower than 5°C.
Disconnect the plug from the
socket, then allow the machine
to rest at ambient temperature
for the necessary time.
(N.B. Depending on the initial
temperature, this time may be of
up to 2 hours).
Connect the machine plug again
to the socket, then press either
push-button.
Ok:
call solved.
Non-ok:
machine being serviced.
9
Pilot lights ON with white
light and blinking fast.
1 - Spent capsule drawer
filled.
Empty the spent capsule drawer
and press one of the power
on/supply buttons to reset the
machine.
Ok:
call solved.
Non-ok:
machine being serviced.
10
Coffee is dispensed too fast
and, therefore, it is not so
creamy.
1 - Capsule not compatible.
Use Lavazza capsules or
compatibles.
Ok:
call solved.
Non-ok:
go to step 2
2 - Insertion of a soluble
product pod instead of a
coffee one.
Use a Lavazza coffee pod
(or any one compatible pod).
Ok:
call solved.
Non-ok:
machine being serviced.
Summary of Contents for firma INOVY MINI
