64
IT
EN
PREPARING THE MILK-BASED BEVERAGES
Do not use the milk frothing jug to conserve
the beverages. Always clean the jug thoroughly
after each use.
When the beverage is being supplied, the selected button will
be ON with a blinking blue light.
To supply again, wait until both the supply button and the
On/Stand-by button come on to a steady white light.
Do not make more than 5 consecutive beverages.
The machine will be ready to use again after about 10
minutes.
Press the COLD WHIPPED MILK button
(175 cc) to
start the preparation. After a few seconds, the ma-
chine will start whipping the milk.
Close the milk whipping jug and fit it into the machine.
When the milk frothing jug is correctly positioned, the
machine emits a beep.
Make sure that the milk whipping jug has been cor-
rectly put in place and, also, that the beverage supply
buttons are ON with a steady white light.
Keep the TEMPERATURE Boost button
depressed
over at least 3 seconds.
The machine will emit a double acoustic signal to indicate
the shift to the cold beverage preparation.
Both the Temperature Boost button and the Cold
Whipped Milk icon will turn blue and the machine
will only enable the COLD WHIPPED MILK supply
button.
Summary of Contents for DESEA
Page 231: ......
