“LB 2000 OFFICE COFFEE SERVICE”
M
ANUAL CODE
83356 / R
EL
. 0.00 / M
ARCH
2005
6
27/28
Machine disassembly
Once the piston has been removed all the
gaskets can be easily replaced.
To remount the piston, insert it again in its
position as shown in the figure.
Attention!
At this stage the piston should remain
pressed down towards the base.
The lower perforator is present in the
piston; this can come out if pressed too
firmly and may cause injury to the operator.
Use all means possible to ensure the safety
of the operator.
Note: insert the piston with a fork as
indicated in the diagram.
Keeping pressure on the piston, press the rod
into the slit in the piston until it is fixed
in place.
