Incorrect option selection
If a wrong option is selected the display says that it is not selectable.
Alarm codes
In the event of operating problems, some alarm messages can be displayed, for example:
« Cannot fill water. Please check that the tap is open and then press STAR/PAUSE » (see
chapter «What to do if...»).
End of the programme
When the programme has finished the corresponding message appears on the display. The
button
7
pilot light goes off.
FIRST USE
• Ensure that the electrical and water connections comply with the installation instruc-
tions.
• Remove the polystyrene block and any material from the drum.
• Pour 2 litres of water into the main wash compartment of the detergent drawer in
order to activate the
ECO
valve. Then run a cotton cycle at the highest temperature
without any laundry in the machine, to remove any manufacturing residue from the
drum and tub. Pour 1/2 a measure of detergent into the main wash compartment and
start the machine.
Setting the language
When switching on the appliance for the first time, by turning the programme selector dial
1
, you must set the language that you prefer. When the appliance is switched on again all
the messagges in the display will appear in this language.
If the display is not showing any language screen, the appliance has already been switched
on once. In such case, if you would change the language setting, press at the same time the
buttons
2
and
3
for 6 seconds to activate the menu language.
By pressing the button
4
you can scroll all the available languages.
The display says to press the button
5
to confirm the language and then the button
4
to
change the selection.
Press the button
5
twice to confirm your choice.
Setting the time
After the desired language you must set the time before the first wash. Remember to
change the setting time in accordance with daylight
-
savings time or solar time.
The CLOCK setting permits you to modify/set up the current time. It is important to keep it
updated as the current END Cycle Time depends on it.
To set the time press repeatedly the button
4
to select the settings menu ( SETTINGS ) and
confirm your choice by pressing button
5
.
With a single and short pressing of the button
4
, the hours can be adjusted.
Press the button
5
to confirm it. Repeat the previous operation for setting the minutes.
First use
9
Downloaded From WashingMachine-Manual.com Manuals
