LAVAMAC AR-105 Installation, Maintenance And User Manual Download Page 44 | Manualshive

Page: 44 / 56

background image

Installation

44

INSTALLATION, MAINTENANCE AND USER' MANUAL

549263_D_PUB_DATE_7_JUL_2014.DOC

WARNING

CHECK THAT THE HOSE CONNECTIONS ARE TIGHT (CHECK THE CLAMPS)! ANY LEAKAGE
OF CHEMICALS MAY CAUSE SERIOUS BODY INJURIES AS WELL AS SERIOUS DAMAGE TO THE WASHER.
IF ONE OF THE NIPPLES ARE OPEN, CLOSE AND SECURE THE OPENING WITH AN APPROPRIATE
COVER.

Figure 26

Electrical connection

of the liquid soap supply system



The power supply of the liquid soap supply system has to be connected to an external electrical source.

Only authorized workers with a valid qualification must execute the electrical connection on the machine
according to the valid local standards. The correct connection way can be found on the wiring diagram
that is located inside the cabinet in a plastic bag. Do not connect the liquid soap pump system in the
washer.



For electric connection of supply control signals is available on the back side of the machine the terminal

box with LED signalization of activation of the respective pump, see figure 26, pos.3. At the terminal box
there is a label for electric connection. Detail connection of signals could be also found on the electric
scheme of the machine. Signals for supply pumps control are 24V AC. Maximum current for control circuits
of pumps must be limited to 10mA. Lead the cable for connection of pumps control signals through the plastic
cable bushing, pos.2. After connection of conductors to the respective positions of the connector “P”
(screw clamps), fix up the cable by tightening the cable bushing against disconnection and close the box
with the cover. For details about liquid soap supply system programming, see Programming manual.

!

Electrical connection label

«
...
42
43
44
45
46
...
»

Summary of Contents for AR-105

























































Reviews:

No comments

Related manuals for AR-105

Brand: Candy Pages: 136

Brand: Candy Pages: 41

Brand: BALAY Pages: 24

Brand: Parmco Pages: 24

Brand: Fagor Pages: 148

Brand: NEFF Pages: 60

Brand: MAKINEX Pages: 58

Brand: Indesit Pages: 16

Brand: Zanussi Electrolux Pages: 24

Brand: Ariston Pages: 36

Brand: Lavorwash Pages: 56

Brand: Hotpoint Pages: 84

Adora N integrated

Brand: V-ZUG Pages: 64

Brand: Zanussi Pages: 40

Brand: HAEGER Pages: 104

Brand: Haier Pages: 20

FDB1100RHB - Precision Select 24

Brand: Frigidaire Pages: 8

Brand: Frigidaire Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands