LAVA Computer MFG Inc.
nLTS Product Family - Reference Manual – A04
2 Vulcan St. Toronto, ON Tel: +1 416 674-5942 www.lavasimulcharge.com
Canada, M9W 1L2
Toll Free (US & Canada): 800 241-5282
7 of 15
Status LED lights
A Yellow LED and a Green LED are used to report the state of the unit. When power is applied
to the board, the two status LEDs are flashed in unison to confirm the unit is operational and
report the active mode.
The start-up LED flash duration is approximately ½ second on and ½ second off.
During regular operation the LED patterns will vary depending on the active mode.
Status LED behaviour – after power-up
LED Behaviour
Description
The Yellow LED is off.
The Green LED pulses twice quickly, followed by a short
pause, and then repeats.
The unit is waiting for a mobile device to be attached.
The Yellow LED is off.
The Green LED pulses rapidly for two seconds.
The unit has detected a mobile device and is in the process of attaching
to the device. This LED state is a momentary state, after which the
device is treated as connected.
The Yellow LED flashes on and off slowly, then repeats.
The Green LED is on solid.
The mobile device is attached and being charged.
USB peripherals are available to the mobile device.
The Yellow LED blinking on and off and is mostly on.
The Green LED is on solid.
The mobile device is attached and being charged.
USB peripherals are available to the mobile device.
The Yellow LED blinking on and off and is mostly off.
The Green LED is on solid.
The mobile device has been removed.
USB peripherals are available to the mobile device.
