8
ASSEMBLY INSTRUCTIONS
Hardware Used
II
II
B
HH
Hardware Used
M3x6 Bolt
X 6
HH Reflector connector
X 3
FF
GG M5x10 Bolt
ø5 washer
X 4
X 4
Fig. 3
Fig. 4
3.
4.
Insert regulator (G) into the pole (D)
and the base assembly (F), then place
the burner head assembly (C) onto the
top of the pole (D) using four M5x10
bolts(GG) and four Ø5 washers (FF).
Fig.3
Flip open the reflector (B) and fix with
three reflector connectors (HH)
connected with six M3 x 6 bolts (II).
Fig. 4
C
GG
FF
D
F
G
