LAUREL LTS, Owner'S Manual

Page: 24 / 28

- 24 -
Note that that the entry in counts to be sent to Item 3 can be in Hex or Dec formats. Under
Commands , press Connect to make the data connection. The Bus Monitor should show Tx and
Rx “values written correctly.” For information on these values, please see our Modbus Manual
for Counters at
https://www.laurels.com/downloadfiles/Modbus-Manual-CTR.pdf .
The screen captures below are for Modbus TCP, but the syntax is the same for Modbus RTU.
An external panel meter or multimeter connected to the analog output should show the desired
output currents.