7
Problems
• The sound of the pump is
uninterrupted for several min-
utes.
• The sound of the pump is
intermittent.
• Low-water end indicator is
buzzing.
• The green indicator light goes
on and off while you are
ironing.
• There is insufficient or no
steam.
G
EN
ER
AT
O
R
Possible causes
• The pump is unable to start.
• Control of the water level in
the generator.
• There is not enough water in
the water tank.
• You have forgotten to put your
water tank back into its casing.
• The water tank has not been
fitted properly.
• Water is warming up.
• The water tank is empty.
• The switches have not been
turned on.
• The generator is not yet hot
enough.
• The holes in the soleplate
are blocked.
Solutions
• Press the steam control button (8)
on the iron and keep it pressed for
about 20 seconds until the emission
of steam stops. Turn the iron off (2)
and turn off the generator switch
(1). Allow the generator to cool
down for at least 1 hour. Rinse out
the generator (see p.5). Fill the
water tank and fit it into its casing.
The appliance is ready to use.
• This is normal.
• Fill it with water.
• Put the water tank back into its
casing.
• Turn off the generator, take out
the water tank, wipe it using a dry
cloth and put the tank back into
its casing.
• The generator is functioning
normally.
• Fill it with water.
• Switch both switches on.
• Wait for the green indicator
light to come on.
• Once the iron is cold, remove any
obstructions by using a pointed
metal object.
Problems/Solutions
IR
O
N
Problems
• The soleplate is dripping.
• The iron does not heat up.
• The iron is too hot.
Possible causes
• The iron is not ready.
• The thermostat is not well
adjusted.
• The generator has not been
rinsed properly.
• The generetor has been rinsed
with a product other than water.
• Disconnected at the wall.
• The iron switch is off.
• The thermostat is not well
adjusted.
Solutions
• Wait for the iron ready indicator
light to come on.
• Adjust the thermostat following
indications p. 3.
• Rinse the generator according to
the instructions on p. 5.
•
v
Call customer service.
• Plug in at the wall.
• Turn on the iron switch.
• Adjust the thermostat following
indications p.3.
English
