Laundrylux CROSSOVER EHWF09810M/NM, Operating Manual

Page: 22 / 29

Register Adress Information
* 49 Drum counter-clockwise distribution
* 50 Drum clockwise distribution
* 51 Drum 400 RPM spin
* 52 Drum 600 RPM spin
* 53 Drum 1000 RPM spin
* 55 Buzzer test
* 54 Display test
* 56 Detergent pump trigger signal 1
* 57 Bleach pump trigger signal 2
* 58 Softener pump trigger signal 3
* 59 Coin meter test. Each dropped coin adds 1 to displayed total
* Function available in "limited service mode".
*14 Error code register 5 (oldest error)
20 Low water level, wash. (Approximate volume in liters)
21 High water level, rinse. (Approximate volume in liters)
22 Remove rinse. "01" removes second to last rinse. "00" adds it back.
(Default = “01”)
23 Remove prewash. "01" removes prewash. "00" adds it back. (Default = “01”)
Applies to Hot, Warm, and Cold program only
* 40 Door lock
* 41 Cold water (detergent compartment)
* 42 Warm water (detergent compartment)
* 43 Hot water (detergent compartment)
* 44 Cold water (bleach compartment)
* 45 Cold water (softener compartment)
* 46 Drain pump
* 47 Drum counter-clockwise wash
* 48 Drum clockwise wash
24 Default program: "00"=none, "01"=Cold, "02"=Warm, "03"=Hot, "04"=Delicate.
(Default = “01”)
5:2
Service mode
26 Coin Mode/Token Mode. “00”=Coin Mode, “01”=Token Mode. (Default = “00”)
33 Coin Value 1 (default="0.25", range 0.00-9.99)
34 Coin value 2 (default ="1.00", range 0.00-9.99)
27 Key press beep. “00”=on, “01”=off. (Default = ”00”)
28 Regret time, range 0000-9999 seconds. (Default = 30)
29 Firmware version
30 Final spin at 1000 RPM in Cold program
31 Final spin at 1000 RPM in Warm program
32 Final spin limited to 1000 RPM in Hot program
25 Mainwash time, range 000-999 seconds
35 Limited service mode PIN setting. (Default = “1234”)