Laundrylux CROSSOVER EHWF09810M/NM, Operating Manual

Page: 19 / 29

4:1
1
Error code Cause/Action
Err1 Door switch opened during a wash program.
Err2 Drain error. Water is not emptied within 15 minutes. Check drain
pump strainer for clog.
Err5 Water level not reached within 8 minutes. Check water inlet screen
for debris or clog.
Err7 No motor rotation.
Err8 Water level signal above parameter set for safety, during program.
Err10 Water level sensor error.
Fault codes
If power to the machine is accidently cut, the
machine will restart automatically when power
is restored. The machine will resume the pro-
gram it was running at the point the power was
cut.
Faults/errors in the program or machine are
indicated by a numerical error code on the
panel display.
Some error codes are cleared automatically
when the Start button is pressed to restart the
machine and some when the door is opened.
For the other error codes, a service technician
must be called.
Fault codes
Fig.
1
Unb Load cannot be balanced for extraction. Open door and manually
rebalance clothes and press Start within two minutes.
EuAr Communication error between display and power modules.
Pump activates automatically.