background image

FIRE OR EXPLOSION HAZARD

• Failure to follow safety warnings exactly could result in serious injury, death or 

property damage.

• Do not store or use gasoline or other flammable vapors and liqids in the vicinity 

of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS:

• Do not light the gas appliance; Do not touch any electrical switch.
• Do not use any phones in your building.
• Clear the room, building, or area of all occupants.
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas 

supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.
• Installation and service must be performed by a qualified installer, service 

agency, or gas supplier.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded metal, permanent wiring 

system, or an equipment-grounding conductor must be run with the circuit 

conductors and connected to the equipment-grounding terminal or lead on the 

appliance.

FIRE HAZARD:

• Failure to follow safety,warnings exactly could result in serious injury, death or 

property damage.

• Do not install a booster fan in the exhaust duct.
• Install all clothes dryers in accordance with the installation instructions of the 

manufacturer of the dryer.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity 

of this or any other appliance.

WARNING

WARNING

WARNING

FOR YOUR SAFETY

Summary of Contents for CROSSOVER 2.0 Series























Reviews: