Laundrylux CROSSOVER 2.0 Series, Operating Manual

Page: 18 / 22

Service Mode
4:5
073 RTC promotion1 “073”>d>hh.mm>%%%>”073”
074
RTC promotion 1 END “074”>hh.mm>”074”
075 RTC promotion 2 START “075”>d>hh.mm>%%%>”075”
076 RTC promotion 2 END “076”>hh.mm>”076”
077 RTC promotion 3 START”077”>d>hh.mm>%%%>”077”
078 RTC promotion 3 END “078”>hh.mm>”078”
079 RTC promotion 4 START”079”>d>hh.mm>%%%>”079”
080 RTC promotion 4 END “080”>hh.mm>”080”
Note 073-080 ranges: d= day of week “0”-”A”; 0=promotion inactive, 1=Sunday,2=Monday,
...7=Saturday, 8=Every day, 9= Monday-Friday only, A=Saturday and Sunday only; hh=”00”
”23”; mm=”00”-”59”; %%% “000” –“999”, “A00” = Free, Default = “000”
081 Promotion %%% for discount input signal (range “000”-“999”; “A00” = Free, default = “000”
Miscellaneous Settings:
082 LSM PIN code (range=”0000”-”9999”, default=”1234”)
083 FSM PIN code (range=0000”-“9999”, default=”0000” (disabled))
084 Default program (range 0-3, 0=none,1=High, 2=Medium, 3=Low, 4=, No Heat, default=”1”)
085 Default program timeout (seconds, range 000-999, default=060)
086 Temperature displayed in °F or °C (0=°F,1=°C, default=0 (display °F))
087 Disable outlet air temperature display (range 0-1,default =0=enabled,1=disabled)
088 Disable buzzer (default =0=enabled,1=disabled)
089 Serial communication enabled (range 0-1, default = 0) (Reserved for future use)
*098 Machine address (range 000-999, default 000)
*099 Firmware version
*Function available in both “Limited Service Mode” and “Full Service Mode”.