Coin Meter
2:3
credited time shall be increased before being added to the base price of the drying program. For
example, if “Time for amount to start”, (Register 044 – 047) = 30 and Time for additional coin or
push, register (048 – 051) = 10 and promotion percentage = 50, then 45 minutes shall be credited
when the Amount to start is paid and 15 minutes shall be credited when additional coin 1 pulses are
received. Setting the promotion to “A00” sets the machine to free dry mode.
Note that the remaining drying time will not exceed the Maximum Drying Time established for each
program in the Maximum Drying Time registers (052-055).
PROMOTION PRICING VIA THE REAL TIME CLOCK (RTC)
The RTC and Promotion pricing times are set and displayed in 24hr format. (e.g. 1:15 PM = 13:15).
The promotion days of the week are represented by a two digit number (nn). The RTC’s built in
calendar adjusts for leap years. Promotion pricing set up requires setting the RTC and up to four
pairs of Promotional start and stop times and percentages.
RTC and Promotional Pricing Setup
1. Navigate to Register 72 (RTC set-up) as explained in the Service Mode section.
2. Press START, this will stop the clock. The year will be displayed as a four digit number (yyyy).
Edit these values using the HIGH, MEDIUM, LOW, and NO HEAT buttons.
3. Press START, the Month and Day will be displayed as two-digit numbers (mm.dd). Edit these
values using the HIGH, MEDIUM, LOW, and NO HEAT buttons.
4. Press START, the Hour and Minutes will be displayed in 24 hr format as two digit numbers (hh.
mm). Edit these values using the HIGH, MEDIUM, LOW, and NO HEAT buttons.
5. Press START to save the changes and exit register 72. This will reset the clock to the set time,
reset the clock’s seconds digit to “00”, and restart the clock. This allows synchronizing the
clocks on multiple machines to a master clock such as a wall clock, wristwatch, or cell phone.
6. Navigate to Register “73” (RTC Promotion #1 START) to set the percentage discount, day of the
week and start time for promotion #1.
7. Press START, a two-digit day number (“0d”) for which the start day(s) of the week for promotion
#1 will be displayed. (1=Sunday, 2=Monday, ... 7=Saturday, 8=All days, 9=Monday-Friday only,
A=Saturday and Sunday only, 0=promotion is inactive.) Edit this number using the NO HEAT
button to cycle through the allowed values.
8. Press START, the Hours and Minutes in 24 hr format for the start of Promotion #1 will be
displayed (hh.mm). Edit these values using the HIGH, MEDIUM, LOW, and NO HEAT buttons.
9. Press START, the promotion percentage discount will be displayed as three digits (%%%). The
discount can range from “000” = 000% to “999%” = 999%. Setting the promotion to = “A00” will
allow free drying). Edit this number using the Medium, Low and No Heat buttons. Note, pressing
the Medium button ten times will cycle the value to “A00”.
10. Press START to save the changes and exit Register “73”
11. Navigate to Register “74” (RTC Promotion #1 END”). This will allow you to set the end time for
promotion #1.
12. Press START, the promotion end time in hours and minutes in 24 hr format will be displayed
(hh.min). Edit these values using the HIGH, MEDIUM, LOW, and NO HEAT buttons.
Summary of Contents for CROSSOVER 2.0 Series
Page 21: ...Intentionally blank...
