background image

 

 

         

                                                                 +1.800.867.4580                      [email protected]                          www.laundryjet.com

 

 

24 

 

Warranty 

7

 

Warranty 

 

 

Lifetime Limited Warranty 

 

 
Laundry  Jet is protected by a 3 year limited lifetime warranty. This warranty is valid from the  date of 
purchase,  for  as  long  as  you  are  the  original  owner,  the  system  remains  at  its  original  place  of 
installation  and  as  long  as  the  warranty  form  has  been  completed  and  submitted  on  our  website: 

http://www.laundryjet.com/warranty

 

 

• Plastic body of the Laundry Jet Units 
• Laundry Jet Posiflo Power unit  
• Ports  
• Digital Control Board 

 

THIS IS THE SOLE AND EXCLUSIVE WARRANTY OF LIFE FLOW LLC – LAUNDRY JET. IMPLIED WARRANTIES, 
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE 
LIMITED IN DURATION OF LIMITED WARRANTY PERIOD. 
 
Should any defect in material or workmanship appear within the time of the above warranty, the selling 
Laundry  Jet  Dealer  should  be  contacted  in  the  first  instance.  The  Dealer  shall  repair  or  replace  (at 
Laundry  Jet’s  sole  option),  or  credit,  such  part  or  parts  in  accordance  with  the  applicable  warranty 
period stated above. Lifeflow, LLC – Laundry Jet shall not be responsible for such service unless provided 
by an authorized Laundry Jet Dealer utilizing authentic Laundry Jet replacement parts. 
 
This warranty does not apply to loss or damage resulting from (at Laundry Jet’s sole discretion) normal 
wear  and  tear,  vacuum  of  drywall  dust,  neglect,  abuse  acts  of  God,  accidents,  improper  installation, 
improper  modification  or  alteration,  improper  use  and  operation  or  failure  to  provide  proper 
maintenance. 
 
Some countries, states or provinces do not allow exclusion of warranties or limitations of damages, so 
the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights. 
You  may  have  additional  rights,  which  vary  from  State  to  State,  or  Province  to  Province.  This  limited 
warranty  applies  to  USA  and  Canada  installations  only.  For  specific  warranty  information  for  your 
Country, consult your authorized Laundry Jet Dealer. 
 
Other  warranties  apply  to  other  parts  of  this  equipment  and  optional  accessories.  Please  contact  the 
material accompanying the individual items. 
 

LIFEFLOW, LLC – LAUNDRY JET, SHALL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL, INCIDENTAL, 

OR SPECIAL DAMAGES ARISING FROM  

THE USE OF THIS SYSTEM. 

 

Extended warranties are available at the time of purchase. 

Summary of Contents for ISense

























Reviews: