![background image](http://html2.mh-extra.com/html/launch/x-431-pad-v/x-431-pad-v_user-manual_3923550078.webp)
LAUNCH
X-431 PAD V User Manual
70
6.23 Transport Mode
In order to reduce power consumption, the following functions may be disabled,
including limiting the vehicle speed, not waking up the door opening network,
and disabling the remote control key, etc. At this time, the transport mode needs
to be deactivated to restore the vehicle to normal.
6.24 AdBlue Reset (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea
reset operation is required.
6.25 NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in
engine exhaust. If the NOx fault is re-initialized and the NOx catalytic converter
is replaced, it is necessary to reset the catalytic converter learned value stored
in the engine ECU.
6.26 Stop/Start Reset
This function is used to open or close the automatic start-stop function via
setting the hidden function in ECU (provided that the vehicle has a hidden
function and supported by hardware).