![background image](http://html2.mh-extra.com/html/launch/x-431-pad-v/x-431-pad-v_user-manual_3923550032.webp)
LAUNCH
X-431 PAD V User Manual
24
vehicle’s configuration as follows:
A. OBD II Vehicle Connection: Plug one end of the diagnostic cable into the
vehicle’s DLC, and the other end into the diagnostic socket of the VCI, and
then tighten the captive screws.
B. Non-OBD II Vehicle Connection: For vehicles with non-OBD II diagnostic
socket, a non-16pin connector (adaptor cable) is required.
*Notes:
a). For commercial vehicles, refer to the above connection method to proceed.
b). For passenger vehicles, replace the “Non-16pin connector” with “OBD I adaptor” +
“non-16pin connector (for passenger vehicles)”. Other connections shall also apply.
4.5 Communication Setup
There are two kinds of ways available for the tablet to communicate with the VCI
device: Wi-Fi and USB cable.
The USB cable connection is a simple & quick way to establish communication
between the tablet and the VCI. After properly connecting the USB cable from