X-431 ADAS PRO Calibration Tool User Manual
2
instructions.
Protect the X-431 ADAS PRO calibration tool from water and strong impacts.
Protect the X-431 ADAS PRO calibration tool from long periods of exposure to
solar radiation.
Do a regular check and service for the X-431 ADAS PRO calibration tool.
On Using Vehicle
When working on the vehicle, please carefully read the following information:
Put blocks in front of the driver wheels to protect vehicle against rolling away.
The park position should also be engaged in automatic vehicles.
After a calibration is completely performed, remember to unplug the VCI device
from the vehicle
’s diagnostic socket.
On Using Laser Module
This equipment is equipped with a single Class II infared laser. Use
extreme caution when the laser beam is on.
Do not stare into the laser beam because it may cause damage to/destruction of
the retina.
Ensure the calibration room is properly illuminated.
While moving the laser module along the cross member, hold it tightly to protect it
from falling down on the floor.
While installing a laser module, please make sure it is firmly and securely attached.
On Using Laser Distance Meter
This meter is equipped with a single Class II infared laser. Use extreme
caution when the laser beam is on.
This meter is equipped with a single Class II infared laser. Use extreme caution when
the laser beam is on.
Do not stare into the laser beam because it may cause damage to/destruction of
the retina.
Do not direct the laser beam towards persons, doors or windows.
Do not allow children to use the meter as a toy.
Do not use the meter in a flammable or explosive environment.
Summary of Contents for X-431 ADAS PRO
Page 4: ......