LAUNCH X-431 ADAS PRO Calibration Tool User Manual
23
2. Put the battery in it correctly.
3. Close the battery cover.
*Note: Please take out the battery if you don’t use the meter for a long time.
3.8.2 Operation tips
MEAS
:
If the meter is OFF, press it to power on meter and laser. Press it again, the
measurement begins and the measurement result will be displayed on the screen
promptly.
Reference Edge Setting
:
The default setting for the reference edge of the meter is its back edge. This
means that any distance measurements you take will be referenced to the back
edge of the meter. You can choose to use the front edge of the meter as the
reference edge instead.
Fig. 3-14 Fig. 3-15
To do so, simply press the key, the next measurement will use the front edge as
the measurement reference edge and the
icon will appear on the upper left
corner of the screen. Pressing it again will change it back to the back edge.
Changing of the measurement reference edge will be confirmed by a beep. Each
time you turn the meter on, the measurement reference edge will be set to the
default mode (back edge).
CLR
:
1) Long press this button will power off. This meter will automatically power off
Summary of Contents for X-431 ADAS PRO
Page 4: ......