LAUNCH
Tyre Changer (TWC-401NIC)
ii
Safety Precautions
Note
z
This manual is a necessary part of the product.
Please read carefully.
z
Keep the manual for later use when maintaining
the machine.
z
This machine can only be used for the
designated purposes. Never use it for any
other purpose.
z
The manufacturer is not held responsible for the
damage incurred by improper use or use other
than the intended purpose.
Precautions
z
The equipment can only be operated by qualified
personnel with special training. Modification to
any components or parts, or use the machine for
other purpose without either obtaining the
agreement from the producer, or observing the
requirement of the instructions may lead to direct
or indirect damage to the equipment.
z
TWC-401NIC should be installed on the stable
ground.
z
Keep the back panel 0.5M away from the wall for
good ventilation. Enough room should be left on
both sides of TWC-401NIC for convenient
operation.
z
Do not put TWC-401NIC in a place with high
temperature or moisture, or near the heating
system, water tap, air-humidifier or chimney.
z
Do not put TWC-401NIC near the window with
sunlight. Protect the unit with a curtain or
shield if necessary.
z
Avoid lots of dust, ammonia, alcohol, thinner or
spraying binder.
z
People who are no operating the machines
should be kept away when it is used.
z
Use appropriate equipment and tools, protective
and safety equipment, including eyeglasses,
earplugs and working boots.
z
Pay special attention to the marks on the
machine.
z
Do not touch or approach the moving parts by
hand during operating.
z
Do not remove the safety device or keep it from
working properly.
z
Use #2 lithium lubricants (grease) only within the
safety range. Refer the appendix for the safety
data.
z
Before moving the tyre changer, contact
maintenance personnel.
