background image

LAUNCH  

                                                                                                                             

Tyre Changer (TWC-401NIC)

 

Trademark Information 

 

 is a registered trademark of LAUNCH 

TECH. CO., LTD. (LAUNCH for short) in China and 
other countries. All other LAUNCH trademarks, 

service marks, domain names, logos, and company 
names referred to in this manual are either 
trademarks, registered trademarks, service marks, 
domain names, logos, company names of or are 
otherwise the property of LAUNCH or its affiliates. In 

countries where any of the LAUNCH trademarks, 
service marks, domain names, logos and company 
names are not registered, LAUNCH claims other 
rights associated with unregistered trademarks, 
service marks, domain names, logos, and company 

names. Other products or company names referred to 
in this manual may be trademarks of their respective 
owners. You may not use any trademark, service 
mark, domain name, logo, or company name of 
LAUNCH or any third party without permission from 
the owner of the applicable trademark, service mark, 

domain name, logo, or company name. You may 
contact LAUNCH by visiting Launch at 
http://www.cnlaunch.com, or writing to LAUNCH, 
Launch industrial Park, North WuHe Avenue, 
Banxuegang industrial Park, Longgang District, 

ShenZhen,Guangdong Province, P.R.China. to 
request written permission to use Materials on this 
manual for purposes or for all other questions relating 
to this manual.   
 

Copyright Information 

 

Copyright © 2000 by LAUNCH TECH. CO., LTD. All 
rights reserved. No part of this publication may be 
reproduced, stored in a retrieval system, or 

transmitted in any form or by any means, electronic, 
mechanical, photocopying, recording or otherwise, 
without the prior written permission of LAUNCH. The 
information contained herein is designed only for the 
use of this unit. LAUNCH is not responsible for any 

use of this information as applied to other units.   
 
Neither LAUNCH nor its affiliates shall be liable to the 
purchaser of this unit or third parties for damages, 
losses, costs, or expenses incurred by purchaser or 

third parties as a result of: accident, misuse, or abuse 
of this unit, or unauthorized modifications, repairs, or 
alterations to this unit, or failure to strictly comply with 
LAUNCH operating and maintenance instructions.   
 

LAUNCH shall not be liable for any damages or 
problems arising from the use of any options or any 
consumable products other than those designated as 
Original LAUNCH Products or LAUNCH Approved 
Products by LAUNCH.     

General Notice 

 

Other product names used herein are for 
identification purposes only and may be 

trademarks of their respective owners. 
LAUNCH disclaims any and all rights in 

those marks.   
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

Summary of Contents for LAUNCH TWC-401NIC





















Reviews: