Laufen CLEANETINTEGRATED, Manual

Page: 16 / 24

16
EN
7 Power Saving
Main power consumption will turn off automatically when power saving is set. The main power will resume once the toilet seat is
occupied again by user. There are 2 types of power saving mode which can be selected:
Operation Guide
F R O N T
B O T T O M
Smart ( ) : CLEANETINTEGRATED stores data about using time and automatically set power saving.
Time set ( ) : By setting the time of power saving the system would start the power saving daily at the saved time.
Example:
From 23:00 to 6:00 and 9:00 to 19:00 will automatically enter into power saving.
Example:
The setting time as 9:00, the range of time setting as 10 hours; once setting start,
daily 9:00~19:00 would dnter in to power saving mode.
1 POWER SAVING
1 Select POWER SAVING Mode
2 Time Set Mode
3 Confirm
Press POWER SAVING button
to activate or decativate.
Press POWER SAVING button for 3
consecutive seconds to switch between.
smart ( ) or time setting ( )
With time set mode selected (display shows
blinking), press to increase or to
reduce the hours of power saving.
Starting time is defined as the moment
the time is set.
Press STOP to confirm or wait for 5 seconds.
TIME 18:00 6:00
0:00
12:00
ON
ON
Setting
time
Setting
time
TIME 18:00 6:00
0:00
12:00
ON
Setting
time
Smart TIME setting
Note: Either Smart POWER SAVING or Time set POWER SAVING will
only be working if power saving is set as on.