Laufen CLEANETINTEGRATED, Manual

Page: 12 / 24

12
EN
Operation Guide
1 Cleaning Function
2 Cleaning Massaging Function
O s c i l l a t i n g C l e a n i n g
P u l s a t i n g C l e a n i n g
With activating the oscillating cleaning function, the nozzle will move back and forth
for widening the cleaning range.
With activating the pulsating cleaning function, the water pressure cycles between strong and soft water
pressure in a certain rhythm for cleaning.
Please occupy the toilet seat in order to activate the sensor installed in the seat.
F R O N T
F R O N T
F R O N T
F R O N T
1 Cleaning
1 Cleaning
1 Cleaning
2 Oscillating Cleaning
2 Pulsating Cleaning
2 Water Pressure Adjustment
3 Nozzle Position
4 Stop
Select REAR or FRONT cleaning to activate
the cleaning function.
Select REAR or FRONT cleaning
to activate the cleaning function.
Select REAR or FRONT cleaning
to activate the cleaning function.
With cleaning function activated, press to activate
or deactivate OSCILLATING cleaning mode.
With cleaning function activated, press to activate
or deactivate PULSATING cleaning mode.
Press to increase or to decrease water
pressure while the cleaning function activated.
5-level adjustment:
While the cleaning function activated, press or to
adjust the stretching length of nozzle.
STOP rear or front cleaning.
01
↔
02
↔
03
↔
04
↔
05
Note: Both cleaning functions cannot work at the same time. Cleaning
function will automatically stop after 5 min, please push the button again to
stop the function. (To change the 5 min go to page 14).