background image

The following applications are considered to be non-intended:

n

in potentially explosive areas

n

for tempering foodstuffs

n

with a glass reactor without overpressure protection

1.3 

Foreseeable misuse

Misuse of the device must always be prevented.
Among other things, the following uses are considered to be foreseeable

misuse:

n

Operation of the device without heat transfer liquid

n

Incorrect connection of hoses

n

Setting the device up on a tabletop surface, only permitted for MC 250

and MC 350

n

Setting an incorrect pump pressure

1.4 

EMC classification

Tab. 1: Classification in accordance with EMC requirements

Device

Interference immunity

Emission class

Customer power supply

Microcool

Type 2 in accordance with

DIN EN 61326-1

Emission class B in

accordance with CISPR 11

only for EU
Domestic connection value

³

 100 A

Microcool

Type 2 in accordance with

DIN EN 61326-1

Emission class B in

accordance with CISPR 11

for rest of the world (outside

EU)
Unrestricted

"This equipment has been tested and found to comply with the limits for

Class A digital device, pursuant to Part 15 of the FCC (Federal Communica-

tion Commission) Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communica-

tions. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the

interference at his own expense."

1.5 

No modifications may be made to the device

Any modification of the device by the user is prohibited. The consequences

of any such modifications are not covered by the product warranty or cus-

tomer service. Service work is only permitted to be carried out by the

LAUDA  Constant Temperature Equipment service department or one of

the service partners authorised by LAUDA.

Non-intended use

Instructions for Class A digital device, USA

V05REV08

Microcool

7 / 57

Summary of Contents for MC 250

































































Reviews: