manualshive.com logo in svg

Lauda LRZ 913, Operation Manual, Page: 32 / 40

Share
Download
Lauda LRZ 913 Operation Manual Download Page 32

7.3  Control and automation software

A terminal program can be used to communicate with the constant tem-

perature equipment. For example, the freeware 

RealTerm

, which can be

downloaded from the following address: https://realterm.sourceforge.io/
The following settings are required to establish a connection to the constant

temperature equipment:
1.

Start the terminal program on the connected system.

2.

Open the 

Port

 tab:

Select the preset baud rate in the 

Baud

 field.

Select the relevant COM port in the 

Port

 field.

Press 

Open

 to confirm your selection.

3.

Activate the option 

Half Duplex

 in the 

Display

 tab.

4.

Open the 

Send

 tab and activate the options 

+CR

 and/or 

+LF

 in the

EOL

 area.

5.

Send a test command such as the read command "TYPE” to the

constant temperature equipment.

If the device type designation, for example "ECO", is received in

response, the connection has been set up correctly.

The program development tool LabVIEW

®

 from National Instruments

https://www.ni.com/de-de/shop/labview.html can be used to create conven-

ient, personalized control software or automation software for operating

constant temperature equipment. In order to cater for the programming

needs of the interface used here, drivers designed specially for LABVIEW

®

can be downloaded free of charge from the download area of its LAUDA

website: https://www.lauda.de/de/services/download-center/filter/Software

Terminal

Fig. 11: Example in RealTerm: selecting the

baud rate and COM port

Fig. 12: Setting the transmission type

Fig. 13: Setting command lines to end auto-

matically with CR/LF

LabVIEW

V1

Interface module LRZ 913

32 / 39

Summary of Contents for LRZ 913









































Reviews:

No comments