Lauda Integral XT 150, Operating Instructions Manual

Page: 65 / 168

Integral XT
YAWE0028 / 24/06/2016
Starting up
63
Command
Max. pressure [bar] 0.0
−
Open the device parameter menu with
the soft key Menu .
−
Change from Pump
à
to
Max. pressure [bar] 0.0 .
−
The settings window opens.
−
Enter the required maximum pressure.
−
If the set maximum pressure is exceed-
ed, the pump is switched off.
7.9.6 Activating external control
An external temperature probe can be connected to the Integral XT Thermostats. How this is done is
explained in Section 7.9.2. If the set point temperature is to be controlled using this sensor instead of
the internal sensor, the setting can be made here.
Furthermore, control can also occur based on the signal from the analog or serial module (
þ
4.8).
Master
Con
and 4 x
Call the source selection for the control
Con
.
−
The momentary setting for the source is displayed,
−
here
1
for internal, because control takes place using the tem-
perature signal from the internal temperature probe.
−
The source display flashes.
Con 1
°C
Help Menu Screen T
set
T
fix
6 7 8 9 0
1 2 3 4 5
Max. Press. [bar]
7,
0
Min: 0,0 Max: 7,0 bar