Lauda ECO GOLD, Operation Manual

Page: 58 / 136

58 / 137
ECO Gold 10/2019 i
8.2.3 Software version
SW version
-
confirm with .
Under the menu point SW version the appropriate software versions are
displayed, depending on the device type and connected modules.
8.2.4 Displaying and changing the device type
Type
-
confirm with .
The device type without the suffix "G" (GOLD) is shown in the menu.
You can change the device type .
Note:
With a change of device type parameters are re-initialized and control parameters adapted by the user are lost!
Therefore, the type change has a three second delay on the key depression.
The overtemperature switch-off point T
max
is automatically adapted to the device type, i.e. with the ECO GOLD ther-
mostat with a stainless steel bath T
max
= 202 °C, for the ECO GOLD thermostat with transparent bath T
max
= 102 °C.
You must now manually re-enter T
max
(

7.4.1), because otherwise the device enters the error status (error message in
ECO GOLD "T max diff. Ctrl-Safety").
8.2.5 Displaying serial numbers
Serial numbers
-
confirm with .
Under the Serial numbers menu point the serial numbers of Control and
Safety are displayed. Provided they are available, the serial numbers of
connected modules are also displayed.

