Lattice Semiconductor MIPI User Manual Download Page 27 | Manualshive

Page: 27 / 31

Lattice Semiconductor MIPI User Manual Download Page 27

MIPI DSI to OpenLDI/FPD-Link/LVDS Interface Bridge Soft IP

User Guide

© 2016 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at

www.latticesemi.com/legal

. All other brand or product names are

trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.

FPGA-IPUG-02003-1.2

27

References

For more information about CrossLink devices, refer to FPGA-DS-02007,

CrossLink Family Data Sheet

For further information on interface standards refer to:



MIPI Alliance Specification for D-PHY, version 1.1, November 7, 2011,



MIPI Alliance Specification for Display Serial Interface, version 1.1, November 22, 2011,



Open LVDS Display Interface (OpenLDI) Specification, version 0.95, National Semiconductor, May 13, 1999

Technical Support Assistance

Submit a technical support case through

www.latticesemi.com/techsupport

«
...
25
26
27
28
29
...
»

Summary of Contents for MIPI
































Reviews:

No comments