7
LatticeSC PCI Express x1
Lattice Semiconductor
Evaluation Board User’s Guide
4.
Press the
SCAN
button located in the toolbar. The LatticeSC device is automatically detected.
5.
Double-click the device to open the device information dialog. In the device information dialog, click the
Browse
button located under
Data File
. Locate the desired bitstream file (.bit). Click
OK
to both dialog boxes.
6.
Click the green
GO
button. This will begin the download process into the device. Upon successful download,
the device will be operational.
Confi
g
uration Status Indicators
(see Appendix A, Figure 5)
These LEDs indicate the status of configuration to the FPGA.
• D2 (RED) illuminated: This indicates that the programming was aborted or reinitialized driving the I
N
IT
N
output
low.
