Lathem PC100-R, Installation & User Manual

Page: 13 / 21

PC100 Terminal User’s Guide
7
C H A P T E R 4
Using the PC100
The base model PC100 clock allows only an RS-232 connection. The PC100-R
model allows RS-232 or RS-485 connections; RS-485 connections require the
Terminal Manager software add-on.
The PC100 has a magnetic stripe badge reader. The magnetic stripe should be on
the left side of the badge when swiping. To swipe the badge, insert it at the top of
the reader, and then pull it down with a continuous and smooth motion.
Special Badges
Three supervisor badges are available for your PC100. These badges perform
certain tasks at the clock.
Badge #251 – View Clock Status
This badge displays a clock status report. The status report shows the current
clock setup:
VER 1.05 | CLK READY
ID#
049 | BAUD 9600
MEM 10% | TIME 12HR
| DST ON