Automatic Safety SpaCover
The CS300HD Auto
Safety
Spa
C
over is a system that can be installed in cover box
e
s that have a width between 10
-
14 inches,
including our polymer housing. It also offers lower offsets than the full sized Eclipse system. This mechanism is designed to
cover spas and small pools up to 12 x 24 or smaller for CS300HD systems or 16 x 32 or smaller for CS3000LO systems.
It can be used in Under Track, Deck
M
ount, or Recessed Top Track applications. Be sure to read through all of the system
requirements in regards to the pool construction, cover box, drainage, and electrical BEFORE you install this system.
SECTIONS
Parts Reference................................................................................... 3
Standard Top Track ........................................................................... 4
Recessed Horizontal / Slim Flush ..................................................7
Mechanism .......................................................................................... 9
Cover Fabric ...................................................................................... 13
Home Owner Checklist..............................................
..........
..
.........
17
Tools Required
1. Hammer drill or rotary hammer
2. Masonry drill bit 1/4” x 6” (1/4” x 12” bit)
3. Exten
s
ion cords
4. #2 and #3 Phillips & standard screw drivers
5. Ra
t
chet with 5/16” - 3/4” sockets
6. Hacksaw
7. String line
8. Utility knife
9. Broom
10. Hammer & rubber mallet
11. Pliers - standard, needle nose & channel lock
12. Files - round, triangular & flat
13.
L
ighter
14. Carpenter’s square
15. 5/16” hex head driver bit with 12”
exten
s
ion
16. Drill (cordless or corded)
17. Set of drill bits (1/4” down to 1/16”)
18. Crescent wrench
19. 100 & 25 f
oot
Tape Measure
20. Chalk line ( use white chalk)
21. Nut drivers - 5/16”, 3/8”, 7/16”, 1/2”
22. Chisel (wood & concrete)
23. Scissors
24. Wire strippers
25. Set of box/open end wrenches - 5/16” - 3/4”
26. 6” level
27. Set of allen wrenches
28. Wire
29. Electrical tape
30. Small sledge hammer
31. Vice grips
32. #2 #3 Phillips drill bits
33. Pencil or marker
34. 6 - 8 clamps
Optional Power tools
Skill saw with carbide tipped blade
Sawzall, Grinder, Angle drill
© Latham Pool Products, Inc. 2018. All rights reserved.
Calibrate Touch Pad Control Switch
...................
............
.
.........
1
8
2 of 19
Installation Check List
...........................
...................
............
.
.........
1
9
