7 AutoDrain Pump Usage and Installation Manual
Step 4: Install the Stop Bracket
a) Position the Pump Head so that it is in the retracted position being careful not to let the Pump Head fall
behind the pool cover .
b) Mount Stop Bracket to the back wall of the automatic safety cover housing.
c) Adjust the Stop Bracket to stop the Pump Head at the desired location under the automatic safety cover
housing lid .
Step 5: Test the movement of the Autodrain System
Test the movement of the Autodrain system by opening and closing the pool cover to ensure that the system
moves in and out during pool cover operation .
Step 6: Hose
Attach the 5/8" HOSE to the 3/4" HOSE using the HOSE CONNECTOR. Route the hose to the desired
drain location. If a hose extension is needed, use the provided 3/4" male threaded adapter to connect to a
3/4" garden hose.
(NOTICE: Increasing the length of the hose beyond the supplied 20' will decrease pump performance).
L0016-15 AutoDrain Installation Man .indd 8
1/30/15 8:40 AM
