background image

MSA Latchways

®

 

Vertical Device

 

LadderLatch, TowerLatch, TowerLatch SP and Climblatch 

                                                                                                 

17 

Latchways, an MSA Company.   

12. EC Declaration of Conformity  

 

EC DECLARATION OF CONFORMITY 

The manufacturer or his authorised representative 

established in the community:

 

Latchways plc 

Hopton Park, Devizes 

Wiltshire SN10 2JP 

England 

Declares that the new PPE described hereafter

 

VERTICAL FALL ARREST SYSTEMS 

is in conformity with the provisions of Council Directive 89/686/EEC and, where such is the case, 
with  the  national  standard  transposing  harmonised  standard  No  EN353-1  and  VG11 
recommendations for use CNB/P/11.073 (for the PPE referred to in article 8(4)) is identical to 
the PPE which is the subject of EC certificate of conformity No ZB049/95 issued by:- 

 

DEKRA EXAM GmbH (Notified Body No: 0158 

– formerly DMT) 

Dinnendahlstrasse 9 

44809 Bochum 

Germany 

 

and is subject to the procedure set out in Article 11 point B of Directive 89/686/EEC under the 

supervision of the notified body:- 

 

INSPEC International Limited (Notified Body No: 0194) 

56 Leslie Hough Way, 

Salford, Greater Manchester, 

M6 6AJ, 

England 

 

 

June 2012

 

 

T. Bissett  

Technical Manager 

Summary of Contents for Latchways LadderLatch




















Reviews: