Lastec Articulator 325D, Owner'S Manual, Page: 21 / 48

Initial Set-Up
Air Cleaner
Initial Set-Up 325D/425D/Odoc082200 3-5
3
Engine Operator’s Manual located at the back of this manual for the proper procedures.
When operating in temperatures ranging from 32° - 77°F (0° - 25°C), engine oil should be
MIL-L-2104C or have properties of API classification CD/CE grades, with an SAE viscos-
ity grade of 10W-30. Due to the nature of the lawn care industry, it is assumed that oper-
ation of the Articulator will typically be in air temperatures within the above listed range.
In the unlikely event that you will be operating the Articulator in air temperatures outside
of this range, consult the Kubota Diesel Engine Operator’s Manual located in the back of
this manual for the proper SAE viscosity grade of oil that should be used.
3.7 Air Cleaner
The air cleaner is located under the engine cover, to the upper left of the engine. There
are two filter elements within the air cleaner. The cap (located on the rear of the air
cleaner) is opened by simultaneously pushing it inward and turning it counter-clockwise.
Check that both filter elements are clean and free of debris. Clean or replace if necessary
prior to operating the Articulator.
3.8 Coolant
Be sure engine is turned off, and allowed to cool.
The radiator is located under the engine cover, behind the engine.
Overheating may occur if the radiator is not cleaned daily. Brush out and clean the radia-
tor and hood grills daily to prevent overheating.
Check the coolant level in the reserve tank (located to the left front of the radiator). The
The radiator is pressurized!
NEVER check the coolant while the engine is running!
COOLANT IS HOT! Always allow ample time for coolant to cool before
checking, changing, or repairing leaks!
Clean Radiator Daily! Overheating may occur if radiator is not cleaned
daily.
Brush out and clean radiator and hood grills daily to prevent
overheating!!
Be sure the coolant system is filled to the proper level, the coolant is
mixed properly, and is in good condition!
ALWAYS check to be sure there are no coolant leaks before operating
the Articulator!
Incorrect mixture, inadequate coolant level, poor condition, or leaks of
any kind can cause severe engine damage!
Go to www.lastec.com for latest changes in this manual.