manualshive.com logo in svg

Lastec 100ER, Owner'S Manual, Page: 3 / 50

Share
Download
Lastec 100ER Owner'S Manual Download Page 3

Table of Contents

Section-Page

Table of Contents

Lastec//021819

3

SECTION 1

TO THE OWNER

1-1

1.1

Read This Manual BEFORE Operating The Articulator .......................................... 1-2

1.2

Product Registration .................................................................................................. 1-3

1.3

If You Need To Order Parts ...................................................................................... 1-3

1.4

Lastec Product Warranty ........................................................................................... 1-4

1.5

Component Manufacturers’ Warranties .................................................................... 1-6

1.6

Servicing The Articulator .......................................................................................... 1-6

1.7

Warranty Registration ............................................................................................... 1-7

SECTION 2

SAFETY INFORMATION

2-1

2.1

Warning Symbols ...................................................................................................... 2-2

2.2

Safety Decals and Symbols ....................................................................................... 2-2

2.3

About This Manual.................................................................................................... 2-4

2.4

Safety Guards And Covers ........................................................................................ 2-5

2.5

Pre-operational Safety Rules ..................................................................................... 2-6

2.6

Operational Safety Rules........................................................................................... 2-7

2.7

Maintenance Safety Rules ....................................................................................... 2-10

2.8

Storage Safety Rules................................................................................................ 2-11

2.9

Hazard Identified Chart ........................................................................................... 2-12

SECTION 3

 INITIAL SET-UP

3-1

3.1

Assembly Instructions ............................................................................................... 3-2

3.2

Transporting the Mounted Articulator....................................................................... 3-2

3.3

PTO Shaft Range Verification................................................................................... 3-2

3.4

Gearbox ..................................................................................................................... 3-3

3.5

Mower Deck Height Adjustment............................................................................... 3-3

3.6

Mower Deck Leveling Adjustment ........................................................................... 3-4

3.7

Deck Drive Belts ....................................................................................................... 3-5

3.8

Deck Belts and Alignment......................................................................................... 3-6

3.9

Blades ........................................................................................................................ 3-8

3.10

Deck Wheels.............................................................................................................. 3-9

3.11

General ...................................................................................................................... 3-9

3.12

Pre-Operation Equipment Inspection Checklist ...................................................... 3-10

Summary of Contents for 100ER



















































Reviews:

No comments