Lastec 100ER, Owner'S Manual, Page: 45 / 50

Maintenance
First 8 Hours
Maintenance Lastec//021819 5-3
5

Perform the appropriate maintenance procedures listed in your tractor manual.

Verify proper installation, operation and flow of grass chutes.
5.2 First 8 Hours

Check deck alignment and belt tension.

Lubricate the PTO quick-disconnect pin or twist sleeve. ( Recommend the use a
nickel-based anti-seize for these areas).
5.3 First 50 Hours

Change gearbox lube with 80W-90 gear oil.
5.4 Every 50 Operating Hours

Check deck alignment and belt tension.

Check deck drive belt alignment.

Grease all blade spindle bearing housings. Fill until grease purges from the weep
hole in the side of the bearing housing.

Inspect all bushings for wear. Replace as needed.

Inspect gearbox pivot stop bolts, wear pad, and bushings. Replace or adjust as
needed.

Check and clean, if necessary, any debris that may have accumulated during
operation.

Check gearbox lube level and condition.
5.5 Every 200 Operating Hours

Change the gearbox oil (28 ounces SAE 80W-90 Grade gear oil).