Lastec 100ER, Owner'S Manual, Page: 32 / 50

Initial Set-Up
Blades
3
3-8 Lastec//021819 Initial Set-Up
3.9 Blades
DANGER!

NEVER inspect, adjust, change, or perform any other maintenance to the blades
while the engine is running!

ALWAYS turn off the blades, turn off the engine, remove the key, and set the parking
brake before attempting to inspect, adjust, change, or perform any other mainte-
nance to the blades!

Keep all personnel clear of all controls while inspecting, adjusting, changing, or per-
forming maintenance to the blades!
The Model 100ER Articulator utilizes five individual 21” blades, located under each articu-
lated mower deck.
NEVER go near, or expose yourself or others in any way to the blades while the engine is
running!
ALWAYS disengage the blades, turn off the tractor, remove the key, and set the parking
brake before attempting to inspect, adjust, change or perform any other maintenance to
the blades!
Keep all personnel clear of all controls while inspecting, adjusting, changing, or perform-
ing maintenance to the blades!
Inspect all blades for proper installation, orientation, tightness, sharpness, and overall
condition. Be sure the lift fins are oriented to the top of the blades. Verify that the mount
bolts are secure, the blades are sharp, and free of any nicks, cracks, or bends. Always
replace any damaged, dull, or missing blades before operating the Articulator. The rec-
ommended torque value for the blade bolts is
75 ft/lbs .
Contact your Lastec distributor for further information about optional blades available.
Danger