- 8 -
Color monitor MVC-8151
call volume
call tone
number of rings
Figure 3. User menu
User menu allows to:
• change the call tone,
• change the call volume,
• set the number of rings,
•
change the code of the code lock.
•
register electronic keys.
To make changes a tenant must activate User menu. The help of the person in the apartment
is needed for this. To activate the User menu, perform the following steps:
•
Establish a connection with the apartment (only from the subordinate entry panel).
•
Press the button KEY in the panel and still pressing it ask the person in the apartment to
press the LOCK button in the monitor five times.
•
Activation of the function is signaled by short beep in the monitor’s and the external pa-
nel’s loudspeaker as well as by message [OPC] displayed temporarily on the external pa-
nel`s display.
•
Finish the conversation.
• Enter the apartment number, then press the KEY button and enter the code of the code
lock. The display will show the symbols defining the current status of individual settings.
In Figure 3 is shown the view of the display after switching on the User menu (view for the
default parameter values).
Change of tone, call volume and number of rings
• [1] The first sign on the display defines the call tone (0 ... 7). The call signal can be chan
-
ged by pressing the button marked with number [1].
• [2] The second sign on the display defines volume of call signal (G – loud, N – incre
-
asing, C – quiet, U – moderate). The selection of an increasing signal is sensible when the
number of call signals is higher than 1. The volume is controlled with button [2].
• [3] The third sign on the display defines the number of rings (1-8) – decides how
long the door entry handset rings. Number of signals is controlled with button [3].
