Rev. A 6/21
4
CT32960CEF
SAFETY FEATURE
1. A thermal overload protector is built in to prevent overheating.
2. If an overheat temperature is reached, the Heater will automatically shut off. It can only resume operation when the user resets the unit.
To Reset Heater:
1. Unplug the Heater and wait 10 minutes for the Heater to cool down.
2. After the Heater has cooled down, plug the unit into a 120V~ electrical outlet and follow the operation instructions described in this manual.
TROUBLE SHOOTING TIPS
If your Heater shuts off unexpectedly or fails to operate, the previously mentioned safety feature may have been activated to prevent overheating.
1. Be sure the power cord is plugged into a working electrical outlet.
2. Make certain the batteries in the remote control are new and properly installed.
3. Check your Temperature setting. The Heater may be off because it has reached the desired temperature setting.
4. If your Heater runs for several minutes and shuts off repeatedly, your Heater may require cleaning. See Maintenance section below.
SERVICING:
For servicing, other than general user maintenance, please contact Customer Service at (800) 233-0268, Monday through Friday, from 8am-5pm Eastern.
STORAGE:
Store the Heater with these instructions in the original carton in a cool, dry place.
DISPOSITION
: Corrugated packaging materials are recyclable. For environmentally responsible disposal of this product, contact your local waste service provider
or visit www.1800recycling.com
®
.
MAINTENANCE
To reduce the risk of electrical shock and fire please observe the following instructions.
Cleaning the Heater regularly will help to maintain its efficiency.
- Always unplug the cord before moving, servicing or cleaning.
- NEVER place the Heater in or near water. DO NOT IMMERSE HEATER IN WATER.
- Clean the Heater only with a vacuum equipped with a brush attachment; the vacuum will remove
the lint and dirt from the surface of the Heater.
- Vacuum intake grills every two weeks; this will help to maintain the optimum Heater performance.
- Use a toothbrush or other soft bristle brush to gently loosen any dirt not removed by the vacuum.
- NEVER attempt to take apart the Heater.
- Clean the body of the Heater with a soft cloth only.
- NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.
LASKO PRODUCTS, LLC LIMITED WARRANTY
(
VALID IN THE USA, ITS TERRITORIES, AND CANADA ONLY)
WHAT THIS WARRANTY COVERS
: This product is warranted against defects in workmanship and/or materials.
HOW LONG THIS WARRANTY LASTS
: This warranty extends only to the original purchaser of the product and lasts for three (3) years from the date of original purchase or
until the original purchaser of the product sells or transfers the product, whichever first occurs.
WHAT LASKO WILL DO
: Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with the same or comparable
model. For all warranty claims, the product must be returned to Lasko Products, LLC at customer expense with proof of purchase within the warranty period. Contact the
Lasko customer service department to obtain a Return Authorization (“RA”). DO NOT return products without an RA or the warranty claim will not be processed.
WHAT THIS WARRANTY DOES NOT COVER
: This warranty does not apply if the product was damaged or failed because of accident, improper handling or operation,
shipping damage, abuse, misuse, unauthorized repairs made or attempted, or the use of the product for commercial or nonresidential service. This warranty does not cover
shipping costs for the return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or replacement.
ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY), LAST THREE YEARS
FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT SELLS OR TRANSFERS THE PRODUCT, WHICHEVER FIRST
OCCURS AND IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY INCLUDE (I) INCIDENTAL OR CONSEQUENTIAL DAMAGES
FROM ANY CAUSE WHATSOEVER, OR (II) REPLACEMENT OR REPAIR OF ANY HOUSE FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING
ANYTHING TO THE CONTRARY, IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF THE
PRODUCT AND ANY SUCH LIABILITY SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD
.
Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these exclusions
or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state and province to province.
Proof of purchase is required before a warranty claim will be accepted.
CUSTOMER SERVICE:
Toll-Free (800) 233-0268. Email: [email protected]
Our Customer Service team is available to assist you with product and service questions, and replacement parts. They can be reached Monday through Friday,
8am-5pm Eastern. Please have your model number available, as well as the type and style (located on the underside of your product).
Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380
(Please do not send product to this location) www.lasko.com
PARTS FOR DISCONTINUED, OBSOLETE AND CERTAIN OTHER PRODUCTS MAY NOT BE AVAILABLE. DUE TO SAFETY REASONS, MANY ELECTRONIC
COMPONENTS AND MOST HEATER COMPONENTS ARE NOT AVAILABLE TO CONSUMERS FOR INSTALLATION OR REPLACEMENT
.
Manual printed in China
AUTOMATIC TEMPERATURE CONTROL
The automatic temperature function will only operate on High Heat Mode. You
cannot set the temperature automatically when the unit is in the Low Heat Mode.
1. To set the room at a specific temperature press the (
) or ( ) buttons to the
desired temperature. The display will now reflect the (
) and the temperature
will be flashing. The Heater is now in Auto Temperature Mode.
2. When you reach the temperature at which you want to set the unit, the set
temperature will flash several times and then the display will return to indi-
cate the current room temperature and will gradually change as the room
temperature changes.
NOTE:
the temperature display does not indicate the
temperature of the heated air being emitted by the Heater.
3. Once the room temperature reaches 2 degrees above the set temperature,
the Heater will shut off. Once the room temperature reaches 1 degree below
the set temperature, the Heater will turn back on and continue to cycle off
and on to maintain the set temperature.
4. This function will cancel if the (
) button is pressed. The Heater will now be
in High heat and run continuously.
NOTE:
It is normal for the Heater “fan” to run for approximately 15 seconds
when the Heater shuts off after reaching the set temperature. Press the (
)
and ( ) buttons at the same time to change the display to ° Fahrenheit. Press
the same two buttons together again to change the display back to ° Celsius.
REMOTE CONTROL
All the functions performed with the Remote Control work identically to the
manual controls except changing °C to °F.
1. Remove screw on battery cover before you install two “AAA” batteries
(not included).
2. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium) batteries.
3. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
4. Always purchase the correct size and grade of battery most suitable for the
intended use.
5. Replace all batteries of a set at the same time.
6. Clean the battery contacts and also those of the device prior to battery installation.
7. Ensure the batteries are installed correctly with regards to polarity (+ and -).
8. Remove batteries from equipment which is not to be used for an extended
period of time.
9. Remove used batteries promptly.
10. Non-Rechargeable batteries are not to be recharged.
If you lose your remote control, please call Customer Service to order a replace-
ment at (800) 233-0268, Monday through Friday, between the hours of 8:00 a.m.
and 5:00 p.m. EST.
Rev. A 6/21
5
CT32960CEF
Chaufferette Tour en Céramique
Numérique avec Télécommande
Manuel d’instructions
Depuis 1906
Utilisé pour le Modèle:
CT32960C
LIRE ET CONSERVER CES INSTRUCTIONS
Lire Soigneusement Avant De Tenter D’assembler, Installer, Opérer Ou De Réparer Le Produit Décrit. Protégez
Vous-Même Et Les Autres En Observant Toute L’information De Sécurité. Le Manquement À Se Conformer Aux
Instructions Pourrait Résulter En Blessure Personnelle Et/Ou En Dommage À La Propriété!
Ce ventilateur est réservé à l’usage résidentiel.
Il n’est pas prévu pour un usage commercial, industriel ou agricoles.
Avez des question? A besion D’une pieces?
S’il vous plait le pas retourne produit au magasin!
Contacter le service au clientele Lasko Products:
(800) 233-0268 Lundi – Vendredi 8AM-5PM EST
(Valide uniquement aux États-Unis, dans les
territoires des États-Unis et au Canada)
Enregistrez votre produit aujourd’hui
www.lasko.com/product-registration/
Vous bénéficierez de :
- Un soutien efficace et amélioré
- Des mises à jour sur des produits à venir
