Laski LS 150 T, Operating Instructions Manual

Page: 23 / 48

23
Coupling to Tractors
This chipper can be coupled to a tractor which is equipped with a three-point hitch,
category I or II and a PTO shaft. This hitch coupling can be done from outside by
means of locking pins, Ø 27 mm for the category II or Ø 22 mm for the category I.
The chipper is height-adjustable (according to tractor tires size) when inserting
pins in other holes, see following figure.
The lower drawbar of the three-point
hitch can be coupled to a pin Ø 27 mm
from outside. The white arrow shows
a coupling point where the lower
drawbar is to be hinged. In both cases
the locking pin must be properly
locked.
Height adjustment by means of a hinge
pin