TRENCHER
ATR 90
9
-
Do not let the machine running at high speed unreasonably.
-
Do not raise the auger or chain speed through changes in the gearings.
-
Do not start this machine in confined or ill-ventilated spaces. Engine exhaust
gases contain poisonous carbon monoxide. Carbon monoxide is odourless,
colourless and can cause death if inhaled
-
Do not use the machine under conditions of low visibility, especially at foggy
weather, when you may overlook persons coming. Operate it only at daylight
or with sufficient lighting.
-
Before working learn all functions of individual controls and safety elements
and carry out functional checks before any use.
-
Do not carry out any repairs that are specified for authorised services only.
-
Do not carry out any repair where its solution exceeds your experiences.
-
Avoid wearing free parts, such as ties, scarves and shawls, belts etc. In case of
longer hairs use always a proper head piece. Otherwise, such a person is not
allowed to operate this machine.
-
While working, wear always personal protective equipment – protecting shield
or goggles, protective gloves, working shoes and working clothes properly
buttoned.
-
Keep all the work safety symbols and markings legible, clear and undamaged.
Residual Risks
HOT PARTS
Some machine components (especially the engine, hydraulic elements, motion
parts, bearings and exhaust manifold parts) can get extremely hot from operation.
To prevent severe burns do not touch these parts while the engine is still running –
or immediately after its turning-off. Do not start the carrier engine with safety
guards removed.
CHAIN OR AUGER IN MOTION
When the engine is turned off, the auger and the chain continue to move for a short
while. Do not touch these parts until they stop – risk of injury.
PERSONAL SAFETY
The following personal protective equipment (P.P.E.) must be worn by the person
operating this machine and also all personnel within a 20 metre radius of the
machine:
-
forestry safety helmet as to EN 397 fitted with a visor as to EN 166