TRENCHER
ATR 90
7
-
This machine is allowed to be operated only by an operator who is over 18
years old, physically and mentally capable and demonstrably instructed with
its operation.
-
This manual should be available and at operator's disposal any time.
-
This machine is allowed to be operated only by an attendant/driver who should
have a respective driver's license (according to a carrier type).
-
Persons under the influence of drugs, alcohol or medication affecting reaction
time must never work with this machine.
-
Keep this machine beyond unauthorised person's and children’s reach.
-
Keep this machine beyond children's and unauthorised person's reach. Avoid
their attendance while trenching. Keep them beyond hazardous area which is a
space around the machine up to 20 metres.
-
Pay special attention to the area on the trencher's right side where its auger
turns.
-
Every operator of this machine is fully responsible for any injury or damage
caused to the third persons within the operating reach of the machine.
-
Before work make sure if necessary operating and ancillary space is free and
safe.
-
Before working learn all functions of individual controls. If necessary, contact
your dealer and ask him for operator's training.
-
The operator is obliged:
-
to use only such a trencher which is in optimal operating condition, not
damaged through transport, storage of from previous operation,
-
Do never any technical changes or any actions that are neither given in this
manual nor allowed by the manufacturer. This machine, if not correctly
installed or adjusted, may run without problems now but in the future any of
important parts could get out of order or do fatal damage.
-
before trenching to learn all local regulations concerning noise and to respect
them,
-
For replacement of worn or damaged parts use always original spare parts
only.
-
The operator of this machine is obliged to trench on bearing and compact
surfaces only.
to stop trenching immediately if there are any undesirable objects in the soil,
to stop trenching immediately if he hears any strange noises or vibrations that
may result from contact of the cutting chain with undesirable objects bringing
usually damage of the chain. Turn the machine off and first remove these
objects.
to respect all work safety instructions.