TRENCHER
ATR 90
21
o
While working on slippery or muddy ground (not only icy)
or on slopes, the carrier wheels may slip. In this case it is
necessary to make continuous corrections for keeping the
required trench line.
-
If you heard any strange noise or vibrations or felt a strange smell while
working, then turn off the engine and pull out the ignition key. Detect the cause
and remedy the failure. Do not carry out any repair where its solution exceeds
your experiences.
In this case contact your dealer or directly the manufacturer. It is forbidden to
work with the trencher being out of order.
-
It is strictly forbidden to block the machine controls anyhow and to
prevent their return in the neutral position. It is also forbidden to start
working with removed guards or with non-functional safety
elements/switches (dead-man control).
Emergency Situations
-
If any person or animal approaches the working area while
trenching (within a 20 metre radius of the machine), then stop working
immediately.
-
If you heard any strange noise or vibrations or felt a strange smell while
trenching, then turn off the machine immediately, pull out the ignition key and
contact your dealer or directly the manufacturer.
-
In case of fire or breakdown, stop trenching immediately.
-
In case of fire use a foam extinguisher only.
-
If you cannot damp the fire down yourself, call for a fire brigade.
Routine Maintenance
-
Any servicing of the trencher should be carried out by authorised
persons only.
-
Any servicing or repair is allowed to be done only if the machine
was put out of operation.
-
Check up the machine for completeness and its general condition.
-
Check up the chain for tightness and wear and keep it in its proper condition.
-
Keep regular intervals for lubrication of the machine.