background image

User Manual: V PRO-OEM 

Stand: 03/2010 

Page 2 of 8

Contents 

Page 

SAFETY INSTRUCTIONS

 ......................................................................................................... 2 

OPERATING THE LASER

 ......................................................................................................... 3 

Using the laser

 .......................................................................................................................... 3 

Control panel

 ............................................................................................................................ 3 

Control panel

 ............................................................................................................................ 4 

ILDA mode

 ................................................................................................................................ 4 

DMX mode

 ................................................................................................................................. 4 

Maintenance / cleaning

 ........................................................................................................... 5 

Technical specifications

 ........................................................................................................... 5 

Change scanner

 ........................................................................................................................ 5 

Adjustable mirror mounts

 ....................................................................................................... 5 

Troubleshooting

 ....................................................................................................................... 6 

ILDA signal

 ................................................................................................................................ 6 

Technical diagram

 .................................................................................................................... 7 

Please note

 ................................................................................................................................ 7 

EU-declaration of conformity

.................................................................................................. 8 

 

Checking parts

 

 
Please check if all listed parts are included, and are not damaged. Included: 
1 x V PRO-OEM housing black 
1 x Power cable 
1 x 9-pin plug 
2 x key 
1 x safety cord 
1 x manual 

SAFETY INSTRUCTIONS  

If the device has been exposed to great temperature changes, do not switch it on 
immediately. Condensation water may damage your device. Leave the device 
switched off until it has reached room temperature. 
The laser must only be used for shows. Any operation has to be attended and 
supervised by a skilled and well-trained operator.   
Never leave this device running unattended and keep it away from children and 
unauthorized persons. 
Keep away from heaters and other heat sources. In order to safeguard sufficient 
ventilation, leave 50 cm of free space around the device. 
Never direct the laser beam to people or animals. 
CAUTION LASER DIODE: If you open the device for 
cleaning, always disconnect from mains! 

-

HEALTH HAZARD! Never look directly into the 

light source, as sensitive persons may suffer 
an epileptic shock!

 

These lasers are considered a definite eye hazard, 
particularly at the higher power levels, which WILL cause 

Summary of Contents for V PRO-OEM









Reviews: