User Manual: Pro-3500RGB
Stand: 11/2008
Page 5 of 10
Operating modes:
Automatic mode: built-in patterns are displayed
Music active: laser is controlled from built-in microphone
“DMXAddr“: DMX512 mode-. Here you can change the DMX address:
“Open“: change address
“Up“ & “down“: increase/decrease address
“Save“: save new address
“LCD display memory function“:
save settings automatically.
Laser: On/Off, when set to Off, laser is off in Auto/DMX mode (ILDA mode only)
X/Y-Axis: mirrors projection horizontally/vertically
Upside down: Display turned upside down
ILDA mode
When an IDLA compatible interface is connected to the laser, the laser is
automatically switched to ILDA mode. Output is then controlled from a PC running
software.
The laser uses pins 4 and 17 of the IDLA signal to detect the presence of an ILDA
interface.
Further information can be found in the software manual.
DMX mode
Channel
DMX512 value
Function
1
Red
0~255
0~100% Dimmer
2
Green
0~255
0~100% Dimmer
3
Blue
0~255
0~100% Dimmer
0~25
Original colour
26~51
White
52~77
Yellow
78~103
Red
104~129
Green
130~155
Cyan
156~181
Blue
182~207
Purple
208~233
Change colour
4
Colour
234~255
Colour flux, slow to fast
0~51
Pattern group 1
52~103
Pattern group 2
104~154
Pattern group 3
155~205
Pattern group 4
5
Pattern group
206~255
Pattern group 5
6
Pattern
0~255
160/5=32pcs
7
Horizontal rotation
0~255
slow to fast
8
Vertical rotation
0~255
slow to fast
9
Rotation about Z-axis
0~255
slow to fast
10
Horizontal movement
0~255
slow to fast
11
Vertical movement
0~255
slow to fast
12
Horizontal size
0~255
slow to fast
13
Vertical size
0~255
slow to fast
14
Hor. and vert. size
0~255
slow to fast
15
Drawing speed
0~255
slow to fast
16
Point draw
0~255
slow to fast
17
Scanspeed
0~255
slow to fast
0~1
Original size
18
Pattern size
2~255
Size (120=original)
