Manual: CS-2000RGB FX
EN page 2 / 11
1. Product and package contents
Please check if all listed parts are included and undamaged. Included in delivery:
1 x laser projector
1 x Interlock connector (already attached)
1 x power cable
1 x key (for key switch)
1 x manual
3.
Initial operations, safety instructions
1. Make sure to use
correct voltage
;
see information on device & in this
manual.
2. Make sure that the device is
not
connected to mains
during ins-
tallation.
3. Installation has to be done by
technical experienced and qua-
lified persons
according to safe-
ty regulations of the respective
country.
4. Always ensure that maximum
permissible exposure (MPE) is
not exceeded in areas accessib-
le to the public or members of
staff.
2. Preliminary warning notices
1. Please use this device only
according to these operating instructions
.
2. Do not use the device if there are any
visible damages
on housing, connector
panels, power supplies or power cords.
3. This device must not be permanently connected to mains. Disconnect it from
mains or use the power button to
switch if off if not in use
.
4.
Never look directly into the light source
of a laser projector. Danger of dama-
ge to the eyes or even blindness in extreme circumstances!
5.
Do not operate the device at high humidity, in the rain or in dusty
environments.
6. Protect device against dripping or splashing water.
Do not place any liquid filled containers near to this device.
Any warranty claims are void if the warranty label is removed or tampered
with in any way.