12
Open the battery compartmenton the
housing‘s rear side and insert a 9 V battery.
Correct polarity must be observed.
1
Insert battery
2
Operation
Switch on:
Briefly press the On/Off button (4).
Switch off:
Keep the On/Off button (4) pressed for 4 seconds.
AutoShutOff:
The device will automatically switch itself off
about 2 minutes after the last measurement.
– The measuring accuracy may be affected when working close
to high voltages or high electromagnetic alternating fields.
Precautions: Use only one MultiFinder Pro within a working
radius of 5 m. Do not use any electronic transmitters or electric
motors in the vicinity.
3
Symbols
Red = Live wire warning
METAL-SCAN and AC-SCAN mode
Green: metal or live wire is nearby
Red: metal or live wire found
STUD-SCAN mode
Red: object is nearby
Green: object found
1
Maximum display
2
VTN display
3
Live wire warning
4
ON / OFF
Switching measuring mode
5
Manual calibration (CAL)
EN
5
4
3
2
1
METAL, AC AND STUD SCAN mode
Metal, wiring, object is nearby
